Warmafloor UK - Underfloor Heating And Cooling Pipework

PIPEWORK

Warmafloor underfloor heating pipe is a five layer co-extrusion incorporating an oxygen diffusion barrier rendering the pipe impervious to oxygen diffusion. The design of this pipe is unique in that the barrier is fully enclosed and therefore not subject to site damage.
The Warmafloor underfloor heating pipe is designed to last for the life of the building and is guaranteed for fifty years.
The underfloor heating pipe is made principally from polybutylene (PB). This pipe is more flexible than other materials used, such as cross linked polyethylene (pex), and therefore can be quickly and easily installed without the use of special tools or heat sources.
The underfloor heating pipe is corrosion resistant and unaffected by corrosion inhibitors when used as recommended.

Warmafloor systems predominantly use polybutylene pipe (PB) for its superior properties.

* More Flexible than PEX or PP
* No special fittings required
* No special tools required
* Expansion rate is 50% less than PEX pipe.
* Unique diffusion barrier incorporated in the pipe not on its surface.
* Uniquely repairable. Polybutylene can be jointed and repaired if punctured by fusion ...welding, permitting it to be re-covered in concrete or screeded applications unlike ...other---pipework which can only be repaired with mechanical joints.
* Made in Britain

PIPE CIRCUITRY

Warmafloor underfloor installations are generally designed and installed using the reverse return pipe layout system. This method gives a far more even floor temperature and therefore a more even heat output across the room.
Dependent upon design requirements the pipe work centres can be spaced at 100,150,200,225 or 300mm centres in 20mm or 16mm diameter pipe. The use of 20mm diameter pipe work at correct spaces provides greater capacity, increased comfort, reduced warm up times and increased running efficiency.

WARMAFLOOR UNDERFLOOR BARRIER PIPE

ITEM CODE

DESCRIPTION

QUANTITY

PB1660

Warmafloor Barrier pipe 16mm x 60m

60 m roll

PB1680

Warmafloor Barrier pipe 16mm x 80m

80 m roll

PB16100

Warmafloor Barrier pipe 16mm x 100m

100 m roll

PB16500

Warmafloor Barrier pipe 16mm x 500m

500 m roll

PB20100

Warmafloor Barrier pipe 20mm x 100m

100 m roll

PB20120

Warmafloor Barrier pipe 20mm x 120m

120 m roll

PB20150

Warmafloor Barrier pipe 20mm x 150m

150 m roll

PB20200

Warmafloor Barrier pipe 20mm x 200m

200 m roll

FLOOR THICKNESS AND COVERINGS

Where large areas of glazing are encountered the pipe spacing can be grouped more densely to match the higher heat losses. All floor finishes can be used with Warmafloor underfloor heating but varying thickness and types of floors will affect the final heat output and time lag.
Coverings such as carpet and wood will give a slower and lower heat output against a covering of say tiles or stones.

Warmafloor UK. Concorde House, Concorde Way, Segensworth North,

Fareham, Hampshire, PO15 5RL

TEL : 01489 581787 FAX: 01489 576444