FAQ's

Below we have created a series of answers to a number of questions we are frequently asked. We hope that these answers will help you during your project. Please select a catagory from the menu directly below.

FAQ catagories:

What is underfloor heating?

Warm water is circulated through a series of pipes laid in the floor at the time of construction. These pipes are of the highest standard and form a continuous loop between two central manifolds. Each room has its own circuit and is individually controlled putting the heat exactly where you want it.

Why choose Underfloor heating?

Because Underfloor Heating runs at a lower temperature than radiators, around 45oC, you'll benefit from reduced running costs and higher efficiency. In fact you could see a 15-40% reduction in running costs! Unlike radiators there are no high temperature surfaces or sharp edges which can cause injury. The low floor surface temperature (around 27°C) results in an extremely comfortable, luxurious environment that is completely safe. For more information go to

Why is underfloor heating better than a radiator system?

One of the main advantages for having underfloor heating is that it eliminates the design drawbacks of radiators. Once they are fixed to the walls they cannot be moved, therefore limiting where you can place furniture around a room.

Is it economical to run?

Yes, users enjoy savings of up to 20% for domestic and as high as 50% for commercial.

Is Underfloor heating more expensive than Radiators to install?

Underfloor Heating is generally more expensive to install. However, bearing in mind the lower running costs, higher comfort and added value to the building, the initial expense is more than justified.

Can I still have an underfloor heating system installed if my build is at an advanced construction stage?

Yes, this can be done, depending on your floor construction. For suspended timber floors where your floor levels are already set (preventing you from laying the pipes on top of your joists), you can install the pipes in-between. Our in house design team will design the underfloor heating system specifically for each individual project.

Can I have underfloor heating installed in my existing home?

Each project is different. In most cases, yes you can and we are always willing to discuss any queries you may have regarding installing underfloor heating in your home.

Can I have underfloor heating in my conservatory or extension?

Conservatories are an ideal situation for an underfloor heating system since the nature of construction usually leaves very little wall space to install a radiator. Likewise, most conservatories have large glass windows that, even when double glazed, can lead to very cold rooms. Underfloor heating warms the conservatory gradually from beneath making them useable rooms all year round.

Is Underfloor Heating suitable for old buildings or Restorations?

Underfloor Heating is ideal for this type of use. You will have to either lift the floorboards or raise the floors in height slightly to accommodate the pipes and insulation, installation is subject to sufficient upgrade of building insulation.

Is the System on all the time?

To function properly, the underfloor heating system must be able to fire the boiler at any time within the daily 24 hour period, but it will only do this if a room requires heat. we can provide controls that allow you to choose when you want your heating on, off or set-back (reduced temperature setting)

Any other questions please do not hesitate to contact our technical department - call 01489 581787

Speak to our
sales team to

  • Arrange a meeting
  • Discuss your project
Tel: 01489 581787
Fax: 01489 576444

FAQ catagories:

Knowledge Centre